Calibration for Every Major Leak Standard
Calibration Compatibility Index
Spectro Physics calibrates leak standards from all major manufacturers. This page lists representative model families we support. It is not exhaustive — if your leak isn’t shown here, we can still calibrate it.
TL7 Internal Leaks
These are internal calibrated leaks installed inside helium leak detectors. They appear under various OEM part numbers depending on the manufacturer.
Representative Models
- TL7
OEM Variants
- TL7/14030
- TL7/200003570
- 14023V01
- 14210
- 14549 LDS
INFICON Leaks
External Leaks
These are external leaks, often with a built-in isolation valve.
Representative External Leak Models
- TL4
- TL5
- TL6
- TL7
- TL8
INFICON Sniffer / Box Leaks
INFICON sniffer leaks are used across HVAC, automotive, refrigeration, and appliance manufacturing. Below are representative models.
Most Common Refrigerant Sniffer Leaks
- 12229 TL410 Test Leak R410A
- 12220 TL134 Test Leak R134a
- 12231 TL290 Test Leak R290
Helium Sniffer Leak
- 12238 Helium-Schnüffel-TL5
Hydrogen Sniffer Leak
- 12322 TL702 Test Leak H₂
Helium / Hydrogen Mixed-Gas Sniffer Leak
- 12339 Cal Leak H₂/He Mix
We calibrate many additional INFICON sniffer and box leak models not shown here.
Pfeiffer Vacuum Internal Leaks
Representative Models
- 121528 (Used in ASM 340, ASM 390, ASM 392, and ASI 35)
- Legacy ASM internal leaks such as 118133 and 101302
Leybold Phoenix Internal Leaks
Leybold internal leaks appear under Phoenix‑specific part numbers but correspond to TL7 internal leaks.
Edwards ELD500 Internal Leaks
Edwards ELD500 systems use TL7 internal leaks under Edwards part numbers.
Agilent / Varian
Most common model numbers begin with F84733
Representative Models
- F8473302
- F8473323
LACO Technologies Leak Models
We calibrate a wide variety of LACO leaks. Part numbers begin with CM.
Representative Model
- CM511.0-71110V0/1
- CM51L-51041V0/1
- CM521.0-2100BV0/3/20-2
- CMTL7
- CMTL6
Vacuum Technology Inc (VTI) Leak Models
We calibrate a wide range of VTI leak standards. VTI part numbers vary widely by fitting, gas type, and flow rate. The examples below represent common configurations.
CLOT Series
- CLOT-4-1C-HE-4FVCR-4VFCR
- CLOT-4-1C-HE-4MVCR-SAVL
FSLT Series
- FSLT-4-HE-500DOT-WFV
- FSLT-4-1C-HE-1C-H2-4MVCR-SAVL
FSLC Series
- FSLC-5-1P-5H95N-8TS-150DOT-WFV-SR5
GPC Series
- GPC-5-HE-QF16-300DOT-WFV
- GPC-5-HE-4MVCR-1000DOT-WFV
GPPT Series
- GPPT-4-HE-4MVCR-1000DOT-WFV-SAVL
- GPPT-5-HE-QF16-300DOT-WFV
GPP Series
- GPP-7-HE-QF25-110CC
- GPP-8-HE-QF25-110CC
GPGC Series
- GPGC-6-HE-QF16-SP522
- GPGC-7-HE-QF16-SP522
RLS Series
- RLS-0.1OZ-3P-R410A-160PSI-LFT
- RLS-3G-3P-R290-100PSI-WFV-LFT
Cincinnati Test Systems (CTS) Leak Models
We calibrate open style and reservoir leak standards manufactured by Cincinnati Test Systems. Below are major families and representative examples
CPS Series
- 1.04CPSH2
- 1.14CPSH2
CPV Series
- 3-4CPV
- 3-5CPV
TP Series
- 1.65TPKF16
- 1.15TPKF16
TPS Series
- 2.54TPS
Vacuum Instruments Corporation (VIC)
Supported Series
- PM
- MO
- SC
- OM
Representative Models
- MO5-150
- MO5X-150
ATEQ Leak Standards
Also referred to as “calibrated jets” these are offered with specified flow rates at a given pressure
Representative Flow Rates (cc/min at specified pressure)
- 0.17 cc/m
- 0.20 cc/m
- 0.24 cc/m
- 0.45 cc/m
LDS Vacuum
We often see leak standards from the SC Series.
- SC-4C
- SC-5TP
- SC-6C
- SC-8
Helium Leak Testing Inc
Representative Model
- HLT-5
Other Manufacturers
We also calibrate leak standards from:
- Custom leak manufacturers
- Unbranded or legacy leak models
- Discontinued OEM models
Don’t see your model?
If your model isn’t listed, we can still calibrate it — just contact us.